Broomfield Sprinkler Repair

Pushing ‘The Easy Button’ To Repair A Sprinkler System In Broomfield, Colorado

sprinkler system installation

Want to have a sweet sprinkler system without getting your hands dirty? No problem! Just sit back, relax, and let a team of folks take care of it. While this can certainly be a Do It Yourself job, you’d better budget a few weeks (and quite a few dollars!) to take care of all the planning and digging, not to mention getting your hands on the parts, and some specialized power tools.

But if you’re ready to get the job done much quicker and with fewer headaches, ere’s a laid-back, step-by-step guide to getting the job done:

  1. Design and Plan:
    • Tell the pros the area you want to cover with your sprinkler system.
    • They’ll measure your lawn and create a cool diagram to map out where the sprinkler heads will go.
    • They’ll consider stuff like water pressure, where the water’s coming from, and what plants you have.
  2. Gather Materials:
    • The pros will handle all the shopping for you. They’ll get a sprinkler system kit with pipes, fittings, sprinkler heads, valves, and a timer/controller.
    • You don’t need to worry about tools either – they’ll bring their own.
  3. Mark Sprinkler Head Locations:
    • Kick back and let the pros do the marking. They’ll put dots where the sprinkler heads will be.
    • They’ll make sure the sprinkler heads are evenly spaced to water your lawn perfectly.
  4. Dig Trenches:
    • No need to break a sweat! The pros will do the digging for you.
    • They’ll use fancy tools to dig trenches along the marked lines, deep enough for the pipes and fittings.
  5. Lay Pipes and Fittings:
    • The pros will take care of laying down the pipes. They’ll start with the main water supply line and connect the lateral lines to reach each sprinkler head location.
    • They’ll cut the pipes to the right lengths and connect them with fittings.
    • To keep everything solid, they’ll glue the pipes and use pipe tape for threaded connections.
  6. Install Sprinkler Heads:
    • Sit back and watch the pros attach the sprinkler heads to the ends of the lateral lines. They’ve got the know-how!
    • They’ll adjust the height and angle of the sprinkler heads to make sure the water reaches all the right spots.
  7. Connect Valves and Timer/Controller:
    • Let the pros handle the valves and timer/controller stuff. They’ll set up control valves and connect them to the timer/controller.
    • They’ll do the wiring and programming – no need to stress about that!
  8. Test and Adjust:
    • Time for the pros to do their magic! They’ll turn on the water and test the system for leaks or any issues.
    • They’ll tweak the spray pattern and direction of each sprinkler head to make sure your lawn and garden get the right amount of water.
  9. Backfill and Cleanup:
    • You won’t lift a finger! The pros will carefully backfill the trenches, making sure everything is secure and looks neat.
    • They’ll clean up any mess and leave your place looking awesome.

So, kick back, relax, and let the pros take care of your sprinkle